Road transport services of freight of food products and meals
Electricity, steam and hot/cold water generation and distribution
Uncooked pasta, not stuffed or otherwise prepared
Being updated - Other special- and general-purpose machinery and parts thereof
Bottled waters, not sweetened or flavoured
Professional cleaning services for buildings (version 3.0)
Nonwovens for clothing, protective clothing and upholstery
Pasta, cooked, stuffed or otherwise prepared; couscous
EPDCN-PCR-202410 FOR THE DRIVE MOTOR SYSTEM FOR ELECTRIC VEHICLES
Cradle-to-grave (life cycle stages from production through end-of-life)
Subsystems and components in the drive motor system; coolant
Integrated drive motor systems and split drive motor systems (excluding coolant)
Drive motor systems for electric vehicles including pure electric vehicles, hybrid electric vehicles and fuel cell elect
NPCR 026:2024 Part B for Furniture and components of furniture (references to EN 15804+A2)
Cradle-to-grave (EPD 3) or Cradle-to-gate with options (EPD 2)
Indicators describing environmental impacts based on Life Cycle Impact Assessment (LCIA)
Additional information on release of dangerous substances to indoor air, soil, and water
Information on biogenic carbon content required
Reference service life (RSL) to be determined
NPCR Part A: Construction products and services. Ver. 2.0. March 2021
Criteria for the extension of inputs and outputs (cut-off) defined
EPD validity period specified in verification and validity section
Environmental product declaration (EPD) for all types of furniture for domestic, non-domestic, educational and professio
Indicators describing resource use and environmental information based on Life Cycle Inventory (LCI)
Furniture for domestic, non-domestic, educational and professional use, for users of all ages
NPCR 031 Part B for for sea-based aquaculture infrastructure and components (references to EN 15804 +A2)
Product-specific units: 1 piece or 1 kg for nets, ropes, collars, anchors; 1 piece for feed barge
Verification and validity as per PCR part A and relevant c-PCR
A1-A3, A4, C1-C4, D (B1-B7 at farm level only)
Estimated service life based on manufacturer information and compliance with NS9415:2021 safety/use requirements
Weight-based material composition per declared unit shall be provided
Product stage A1-A3 as per PCR part A and relevant c-PCR
EPD content and layout as per PCR part A and relevant c-PCR
Enclosures, Flotation Collar, Feed barge, Anchoring and mooring, Additional equipment (permanent and temporary)
Comparison between environmental performance shall take into consideration use phase scenarios at farm/facility level, i
A4 mandatory; A5 expected at complete fish farm level, not for single parts/semi-assembled/assembled components
B1-B7 expected at complete fish farm level, not for single parts/semi-assembled/assembled components
A4 Transport: Floating collar/feed barge default 200 Nm sea freight (domestic); Other components default 300 km road + 1
Guidelines for development of environmental product declarations (EPDs) for sea-based aquaculture infrastructures/compon
Module D benefits and loads beyond system boundary as per PCR part A and relevant c-PCR
Sea-based aquaculture infrastructure and components
End-of-life stage C1-C4 as per PCR part A and relevant c-PCR
NPCR 014:2023 Part B for Windows and doors (references to EN 15804 +A2)
Functional unit: 1 window 1.23 m x 1.48 m or 1 door set 1.23 m x 2.18 m or 1 door height sliding/folding elements 3.00 m
Cradle-to-grave for functional unit; cradle-to-gate with options for declared unit
A1-A5, B1-B7, C1-C4, D for functional unit; A1-A4, C1-C4, D minimum for declared unit
Reference service life shall be defined for functional unit
Electrical components of windows and doors; fasteners and additional materials
Windows and doors per EN 14351-1, EN 16034, EN 16361
The Norwegian EPD Foundation (EPD-Norge)
Windows and doors - all kinds of window and door products
NPCR 019:2022 Part B for Piping systems for use in sewage and storm water systems (under gravity) (references to EN 15804 +A2)
Specified length in metres with specified inner diameter
Cradle-to-gate with options or cradle-to-grave
Verification required per EN 15804 and NPCR Part A
NPCR Part A: Construction products and services
Cradle-to-gate with options includes A1-A3, A4, A5, C1-C4 and D as minimum
A typical installed and backfilled piping system over a specified distance in metres
Pipes, fittings, and inspection chambers/manholes from all material types (EN 476)
Construction process stage A4-A5 included with installation details
Use stage B1-B5, B6 (energy), B7 (water) included
A4-A5 construction stage includes transportation and lifting equipment
Environmental product declaration for piping systems for sewage and storm water
Module D benefits and loads beyond system boundary included
Piping systems for use in sewage and storm water systems (under gravity)
NPCR 029:2022 Part B for photovoltaic modules (references to EN 15804 +A2)
Cradle-to-gate with options or cradle-to-grave for photovoltaic module
Declarable substances and substance groups in accordance with IEC 62474 at or above reporting threshold amounts (e.g. 0.
Declared unit for cell, wafer, ingot block, solar grade silicon, substrates and superstrates; functional unit for module
NPCR Part A: Construction products and services, EN 15804:2012
Product stage A1-A3 information modules declared
PV module, PV cell, wafer, ingot block, solar grade silicon, solar substrates, solar superstrates, solar grade semicondu
Construction process stage A4-A5 information modules declared
Use stage B1-B5, B6 operational energy use, B7 operational water use
Environmental product declarations for photovoltaic modules and related materials in building and construction
Benefits and loads beyond the system boundary (Module D) declared
Photovoltaic modules used in building and construction industry, including production of cell, wafer, ingot block, solar
End-of-life stage C1-C4 information modules declared
NPCR 028:2022 Part B for cable pipes (references to EN 15804 +A2)
EN 15804, NPCR Part A, FprEN 16903, FprEN 16904
Functional unit for outdoor use; Declared unit for indoor use
100 years for civil engineering works; 60 years for buildings
NPCR Part A: Construction products and services. Ver. 1.0. April 2017
1 m of installed cable pipe from cradle-to-grave with activities for study period
Cable ducting and cable trunking per EN 50085 and EN 61386; Cable tray systems and cable ladder systems per EN 61537
Production of capital, buildings and equipment exclusions must be justified with quantitative assessments
Guidelines for development of EPDs for cable pipes either cradle to gate with options or cradle to grave
Cable pipes including cable ducting, cable trunking, cable tray systems and cable ladder systems
Transport data representativeness must show realistic and conservative vehicle type, fuel use and load factor
NPCR 022:2022 Part B for roof waterproofing (references to EN 15804 +A2)
Release of dangerous substances to indoor air, soil and water
Greenhouse gas emissions from land use change and Carbonation
Plastic and rubber sheets, Reinforced bitumen sheets and shingles, Metal roof, Concrete roof tiles, Clay roof tiles
Guidelines for development of environmental product declarations for roof waterproofing materials
Accounting of biogenic carbon during the life cycle
NPCR 012:2022 Part B for thermal insulation products (references to EN 15804 +A2)
Parameters describing environmental impacts and resource use
Additional information on release of dangerous substances to indoor air, soil and water
Criteria for the exclusion of inputs and outputs (cut-off)
Declaration of general information and environmental parameters from LCA
Environmental product declaration for thermal insulation products
Data quality requirements for temporal representativeness
Thermal insulation products including mineral wool, EPS, XPS, PUR, PIR, phenolic foam, cellular glass, wood wool, expand
NPCR 010:2022 Part B for building boards (references to EN 15804 +A2)
NPCR Part A: Construction products and services, EN 16485, NPCR015 Part B
Environmental product declarations for building boards either cradle to gate with options or cradle to grave
Building boards including gypsum plasterboards, particleboards, OSB boards, wood fibreboards, plywood, composite panels,
NPCR 027:2022 Part B for Electrical cables and wires (references to EN 15804 +A2)
1 m of installed electrical cables or lines (outdoor); 1 m installed electrical cables (indoor); 1 kg of wires (raw mate
All kinds of electrical cables, wires and transmission lines prepared for trade made of different materials
Production of capital, buildings and equipment exclusions must be justified based on quantitative assessments
Cradle to gate with options or cradle to grave
Benefits and loads beyond the system boundary
NPCR 025:2022 Part B for Asphalt (references to EN 15804 +A2)
Default ESL 40 years for roads; 30 years for other constructions
Production of raw materials, extraction of material and energy resources, transports upstream of asphalt raw material pr
A4: Transportation of produced asphalt to place of use, keeping asphalt hot. A5: Application of asphalt layer with defin
Use stage includes emissions to air and water, particulate emissions, surface wear from studded tires calculated based o
Asphalt - product mainly consisting of aggregates and bituminous binders, used as construction material in roads and oth
NPCR 018:2022 Part B for natural stone products, aggregates and fillers (references to EN 15804 +A2)
Forest clearance with economic value excluded by partitioning; without economic value as in Part A
Companies preparing environmental product declarations for aggregate or natural stone products
Product stage A1-A3 required for all product types
As in PCR part A; similar products only if LCIA variations do not exceed ±10%
Construction stage A4-A5 optional for bound aggregates, included in minimum/maximum for unbound
A1 requires specific inventory for extraction including dynamite, machinery, heavy metal leakage; A2 requires specific t
Module D benefits and loads beyond system boundary required
Natural stones, aggregates and natural sand
End-of-life C1-C4 required for unbound aggregates and natural stones
NPCR 023:2021 Packaging products and services (references to EN 15804 +A2)
Cradle-to-grave with modular approach including A1-A3 (product stage), A4 (supply stage), B1-B2 (use stage), C1-C4 (end-
Verification and validity of an EPD is required
Additional information on the release of dangerous substances to indoor air, soil and water is required
Information on biogenic carbon content shall be declared
Reference service life (RSL) shall be determined with specific guidance provided
Comparability of EPDs for packaging products and services is addressed
Criteria for the exclusion of inputs and outputs (cut-off) are defined
Environmental product declaration (EPD) for packaging products and services
Packaging products and services, including film packaging, product containers, boxes, baskets, bags, crates, pallets, fr
Allocation procedures for reuse are defined
NPCR 024 Explosives and Initiation Systems (references to EN 15804+A2)
Cradle-to-gate (A1-A3) with mandatory modules A4, A5, C1-C4, D; or cradle-to-gate (A1-A3) with mandatory A4, A5 only
Substances from detonation: C, CH4, CO2, H2O, N2, Na2CO2; optional secondary reaction products: CO, H2, NH3
Emissions from detonation calculated from balanced chemical reaction at final state and 1 bar
A1-A3 (mandatory), A4 (mandatory), A5 (mandatory), B1-B7 (optional), C1-C4 (mandatory), D (mandatory)
NPCR Part A: Construction products and services Version 2.0
Packaged Explosives, Bulk Explosives, Black Powder, Electrical detonators, Non-electric detonators, Electronic detonator
Environmental Product Declaration for Explosives and Initiation Systems
Module D benefits and loads beyond system boundary mandatory
NPCR 015 Part B for wood and wood-based products (references to EN15804+A2)
Cradle-to-gate with options including A1-A3, A4-A5, C1-C4 and D modules
EN 16485 Round and sawn timber - Environmental Product Declarations - Product category rules for wood and wood-based pro
Companies preparing an environmental product declaration for wood and wood-based products
Strength graded structural timber, solid wood panelling and cladding, glued laminated wood products, wood flooring, timb
Wood and wood-based products for use in construction
NPCR 013 Part B for Steel and Aluminium Construction Products (references to EN15804+A2)
Cradle-to-gate with options including A1-A3, A4, C1-C4 and D (minimum requirement)
A1-A3 (product stage), A4-A5 (construction stage), B1-B7 (use stage), C1-C4 (end-of-life), D (benefits/loads)
Functional unit for products with surface treatments and maintenance; declared unit for other products
For products where service life and maintenance vary greatly with in-use conditions, both normal and worst case scenario
Fasteners (screws) and other additional materials are not included at product level
Guidelines for development of environmental product declarations for steel and aluminium construction products on the No
For surface treatment with pigments, white and egg white (0502-Y) can be used as proxy for all colours
Steel and aluminium construction products
NPCR 009 Part B for Technical - Chemical products for building and construction industry (references to EN15804+A2)
A1-A3 Product stage, A4-A5 Construction process stage, B1-B5 Use stage related to building fabric, B6-B7 Use stage relat
glues, adhesives, screeds, plasters, renders, fine smoothing compounds, sealants, primers, mortars, liquid applied membr
Technical-chemical products for building and construction industry
NPCR 020:2021 Part B for Concrete and concrete elements (references to EN15804+A2)
Composite products: 1 m2; Massive reinforced: 1 tonne; Roof tiles: amount per 1 m2; Paving blocks: quantity per 1 m2; De
Cradle-to-gate, cradle-to-gate with options, or cradle-to-grave
For concrete: minimum A1-A3, A4. For concrete elements: A1-A3, A4-A5, C1-C4
Functional unit for cradle-to-gate with options and cradle-to-grave; declared unit for cradle-to-gate only
Reference service life as defined in PCR part A and EN 16757
For massive reinforced products: 1 tonne of concrete; for roof tiles and paving blocks: kg/m2 documented
System boundary includes A1-A3 (product stage), A4 (transport), A5 (construction), B1-B5 (use), C1-C4 (end-of-life), and
EPD content includes general information, environmental parameters from LCA, scenarios, additional technical information
Product and insulation thickness for composites; concrete mass for massive products; tile dimensions and quantity for ro
Structural concrete/elements (exterior/interior), non-structural elements (buildings/agricultural), civil engineering el
Guidelines for development of environmental product declarations for concrete and concrete elements; cradle to gate, cra
Technical specifications shall be declared as specified in PCR Part A
Concrete and concrete elements for building and civil engineering works, excluding autoclaved aerated concrete
Conversion factor to convert mass to area or volumetric use; density to convert volume to mass
NPCR 030:2021 Part B for ventilation components (references to EN 15804 +A2)
1 meter of product for ducts; 1 piece of product for other components
Reference service life shall be stated and based on manufacturer information
Scope of materials included in product and packaging in declared unit shall be same as in traded product
Air ducts (circular, rectangular, flexible), duct fittings, air distribution equipment, fans, chilled beams, dampers, fi
Cut-off criteria in EPD-Norway's general program of instruction shall be followed
Guidelines for development of environmental product declarations for ventilation components
Ventilation components prepared for trade made of different materials
PEFCR Guidance document v6.3 (EU Environmental Footprint Category Rules guidance)
Cradle-to-gate and cradle-to-grave studies
Independent verification and validation of EF studies
EF impact categories with normalisation and weighting factors
Circular Footprint Formula for end-of-life allocation
Biogenic carbon accounting in climate change modelling
Mandatory company-specific data requirements
Life cycle stages including raw material, manufacturing, distribution, use, and end-of-life
Stakeholders involved in PEFCR development
Material content and composition declaration
Product Environmental Footprint Category Rules
PART A: Construction Products and Services Ver 2 (references to EN 15804+A2)
Verification and validity of an EPD required
Information on biogenic carbon content to be declared
Reference service life (RSL) to be defined
Companies preparing environmental product declarations for construction products and services
Guidelines for development of environmental product declarations for construction products and services
Resource use and environmental information based on Life Cycle Inventory (LCI)
Construction products and services, including construction elements and integrated technical systems used in any type of
NCPR 014:2019 Part B for Windows and doors
Functional unit: 1 window 1.23 m x 1.48 m OR 1 door set 1.23 m x 2.18 m OR 1 sliding/folding 3.00 m x 2.18 m
Additional information on release of dangerous substances to indoor air, soil and water required
A1-A5, B1-B7, C1-C4, D (functional unit); A1-A4, C1-C4, D minimum (declared unit)
Functional unit for outdoor use; declared unit for indoor use; functional unit for project-specific EPD
60 years (building); 30 years (glass unit)
EPD must declare environmental parameters from LCA, resource use, waste categories, biogenic carbon, land use change emi
Windows and doors per EN 14351-1, EN 16034, EN 16361; power operated pedestrian doors; sliding/folding elements
Environmental product declarations for windows and doors
Essential parameters required: u-value, fire classification, or noise reduction
Data age and reference year requirements as per PCR Part A
IBU EPD (product declaration, not a PCR) — disambiguation test
Being updated - Finished bovine, ovine, and caprine leather
Cradle-to-gate with optional modules for construction, use, and end-of-life
Technical Committee of the International EPD® System
Finished bovine leather from adult bovines and calves, all tanning methodologies (wet blue, wet white, vegetable tanning
Absorbent Hygiene Products including napkins for babies, tampons, and similar household, sanitary or hospital articles o
At the customer gate, at the shelf or the retailer or at the marketplace
Sales of fresh eggs to both Business-to-Business (B2B) and Business-to-Consumer (B2C)
EPD International AB, Box 210 60, SE-100 31 Stockholm, Sweden
Corrosion protection of fabricated steel products (updating process terminated) (expired 2021-04-05)
1 year of protection of 1 m² coated steel plate
Corrosion protection of fabricated steel products
Basic inorganic chemicals n.e.c. (expired)
Pure basic inorganic chemicals, mixtures of basic inorganic chemicals, basic inorganic chemicals diluted in solvents, ba
Basic inorganic chemicals not elsewhere classified (n.e.c.)
Sub-PCR-A Mortars applied to a surface (construction product)
1 m² of surface with reference mass per m² based on typical density and layer thickness
Landfill as non-hazardous waste or recycled as crushed material; reprocessing procedure if established shall be specifie
PCR 2012:01 Construction products and construction services, Version 2.34
Maintenance, repair, replacement, refurbishment scenarios with frequency and material/energy/water use during RSL shall
Environmental Product Declarations with cradle-to-grave scope using functional unit
Product stage including raw material supply, transport and manufacturing
Reference mass of material (dry weight kg) per end use surface (m²) defined by product density and layer thickness
Floor screed, tile adhesives, renders, plasters and masonry mortars supplied in bulk, big bags or handy bags
Use stage including emissions, maintenance, repair, replacement, refurbishment scenarios; B6-B7 no water or energy requi
Mortars applied to a surface (construction product)
End-of-life including demolition, transport (default 50 km by lorry), waste treatment and disposal as landfill or recycl
If emission to surrounding media regulated by harmonised European standard (CE labelling), emission value or class for r
Machine-tools for drilling, boring or milling metals and composite materials
Companies or organisations presenting environmental performance information
Technical Committee of the International EPD System
At the customer gate, at the shelf of the retailer or at the market place
Agriculture, production of plants/seeds, fertilizers, semi-products, electricity, fuels, ingredients, spices, additives,
PCR 2012:09 Site remediation and clean-up services, soil and groundwater
Cradle-to-gate, may be cradle-to-grave if downstream processes relevant
1 m³ of treated soil or 1 m³ of treated water
Laboratory analysis for site characterization, control and monitoring services
Any activity related to implementation of authorized plans for remediation of soil and groundwater on contaminated sites
Comparison only among different techniques on same remediation site with same remediation target
Site remediation and clean up services, soil and groundwater
Meat of Mammals (fresh, chilled or frozen)
Air ducts, substantial materials (non-construction product)
ISO 14025, ISO 14040/14044, General Programme Instructions version 3.0
All elementary flows at resource extraction shall be included, except for flows that fall under the general cut-off rule
Ducts for smoke extraction and fire resistant ducts
Woven, knitted or crocheted fabrics (of synthetic fibres) (expires 2021-09-23)
Woven, knitted or crocheted fabrics of synthetic fibres
Machines for filling and packaging of liquid food
Optional equipment such as conveyer belts, packaging robots; machinery for cleaning or drying bottles; machinery for aer
machinery for filling, closing, sealing, capsuling or labelling bottles, cans, boxes, bags or other containers for liqui
Furniture, except seats and mattresses (expired)
One unit of product including its packaging
Seats (CPC 3811), mattress supports and mattresses (CPC 3815), parts of furniture (CPC 3816), chairs and couches
All furniture goods not specified in CPC 3811 (Seats), 3815 (Mattress supports and mattresses), 3816 (Parts of furniture
Sub-PCR-B Synthetic carpet yarn (construction product)
EN 15804:2014 (Sustainability of construction works - Environmental product declarations - Core rules for the product ca
A1 (Raw material supply), A2 (Transport), A3 (Manufacturing), A4 (Transport)
A minimum of 99% of the total weight of the declared product including packaging shall be included
Raw material supply (A1), Transport (A2), Manufacturing (A3) - may be declared as aggregated module A1-3
Source of raw materials dataset and main hypotheses adopted shall be declared in the EPD. For generic data, materials fo
Synthetic yarn used for building purposes (e.g. in floor, roof, ceiling, walls, etc.)
If emission to surrounding media is regulated according to harmonised European standard (CE labelling), emission value o
10 years of use or one day of effective usage of a prefabricated building
A1-A5 (cradle-to-gate) or A1-A5, B1-B7, C1-C4 (cradle-to-grave)
Declared unit based on reference service life (RSL) or effective usage days
Use stage B1-B5 included in cradle-to-grave approach
Prefabricated buildings including wood, metal, plastics, and concrete prefabricated buildings
End-of-life stages C1-C4 included in cradle-to-grave approach
At customer gate, retailer shelf or marketplace
ISO 14025, ISO 14040/14044, General Programme Instructions version 2.5, PCR Basic Module CPC Division 01 version 2.5
A minimum of 99% of total weight of declared product including packaging shall be included. General 1% cut-off rule appl
At customer gate, shelf of retailer or marketplace
Cereals (wheat, maize, rice, sorghum, barley, rye, oats, millet, other cereals), oilseeds (soya beans, groundnuts, cotto
Arable crops including cereals, oilseeds, pulses, forage products and pseudocereals
Corrugated Paper and Paperboard as defined by UN CPC sub-class 32151
Plastic waste and scrap recovery (recycling) services (updating process terminated)
Mechanical and chemical recycling of plastic waste
Plastic waste and scrap recovery (recycling) services
Wall mounted liquid soap dispensers, hand sanitizers of plastics, industrial dispensers, bobbins, bottles, boxes, carboy
Dispensing systems for fragrance, cosmetic, personal care, home care, food and beverage, and pharmaceutical products
Enterprise routers, Wi-Fi extenders, home network infrastructure devices
Home and SOHO (Small Office, Home Office) Gateways
Being Updated- Textile yarn and thread of natural fibres, man-made filaments or staple fibres
Man-made fibres, synthetic filament tow and staple fibres not carded or combed, synthetic filament yarn (except sewing t
All yarns and fibres, natural and man-made, intended for application in apparel, household textile, floor covering, upho
Textile yarn and thread of natural fibres, man-made filaments or staple fibres
ISO 14025, ISO 14040/14044, General Programme Instructions version 4.0
Footwear with uppers of leather other than sports footwear, footwear incorporating a protective metal toe-cap and miscel
Processed liquid milk and cream (expired 2021-09-01)
Avoid allocation by subdivision; if not possible, follow allocation instructions in Table 1
PCR Basic Module, CPC Division 22 Dairy products and egg products, version 3.01
Yoghurt, butter and cheese (expired 2021-09-01)
Step-wise procedure: avoid allocation by subdivision; if not possible, apply allocation rules
Defined at shelf or retailer or marketplace
Both declared unit and functional unit can be chosen depending on purpose
Highways, streets and roads (except elevated highways)
Cradle-to-grave for new roads; cradle-to-use for existing roads
External/independent verification required
Both declared unit and functional unit can be used; declared unit recommended for comparisons within same company; funct
Location, boundaries, design of infrastructure system, extent of project, traffic characteristics, pavement type, road s
Information about lifetime shall be declared in number of cycles; single use cloths declare one cycle
Cleaning cloths (floor-cloths, dusters and similar cleaning cloths)
Furnishings such as kitchen fixtures, bathroom fittings, wallpapers shall not be included
Structural frame, foundations, walls, windows, doors, stairs, roof, water supply, drainage, sanitary systems, heating, c
Buildings corresponding to UN CPC 531 including residential and non-residential buildings
Parts and accessories of computing machines (e.g. laser printer cartridges)
Reference flow defined at retailer or marketplace
Remanufactured components of computing machines
Vegetable juice, Plant milk, plant milk based products, and Other prepared and preserved vegetables, pulses and potatoes (being replaced)
Customer gate, shelf of retailer or marketplace
CPC 2132 Vegetable juices (tomato juices and other vegetable juices), Plant dairy, CPC 2139 Other prepared and preserved
Vegetable juices, plant milk, plant milk based products, and other prepared and preserved vegetables, pulses and potatoe
Fabricated steel products, except construction products, machinery and equipment (replaced)
Naval chains, bearing steels, tool steels, shafts for automotive industry, tubes, pipes and hollow profiles
Fabricated steel products, except construction products, machinery and equipment
Basic iron or steel products & special steels, except construction steel products
Construction steels (covered by PCR 2019:14); CPC 41117 Granules and powders of pig iron and spiegeleisen
Semi-finished steels or intermediate steels: ingots, billets, blooms, slabs, plates, bars, rolled steel; Pig Iron
Crude steel and/or basic iron steel products including Special steels (except those destined to become construction prod
Review panel verification by Technical Committee
Skip hoists, escalators, moving walkways
Lifts (elevators) - machinery for transportation of persons or freights with vertical or inclined trajectories
Yachts, small crafts, vessels, and components thereof (main PCR) (previous version expired 2019-11-18)
Companies or organisations developing EPDs for vessels and components
EPD shall follow General Programme Instructions and include environmental performance information in specified format
Yachts, small crafts, other vessels, and components thereof
Being updated - Cosmetics (soap, perfume and toilet preparations)
Not applicable for this product category
Detergents and washing preparations (UN CPC 35322)
Soaps and preparations in primary packaging of any size, format, type of closure and virgin, reusable or recycled contai
Cosmetics (soap, perfume and toilet preparations)
Preparations used in animal feeding for food-producing animals
Reference flow defined at the customer gate, at the shelf or the retailer or at the marketplace
Food for pets (CPC subclass 23311), such as cats and dogs
Being updated - Public and private passenger buses and coaches
Similar products with differences lower than ±10% may be in same EPD using representative product; differences higher th
Global applicability with primary basis on European conditions
Public and private passenger buses and coaches
CPC code 21185 (Extracts and juices of meat, fish, crustaceans, molluscs or other aquatic invertebrates)
Preserves and preparations of meat, meat offal or blood
Nonwoven substrate that may be dry or impregnated with liquid, designed for single or multiple use
Nonwoven wipes including baby wipes, make-up removal/cosmetic wipes, moist toilet tissue, feminine hygiene wipes, househ
Blood and blood derived products for therapeutic or prophylactic uses
Single dose of product ready to be administered
One dose of product at the administration
Albumin, globulins, gamma globulins, immunoglobulin, coagulation factors of human or animal origin prepared for therapeu
Disposable surgical drapes, gowns and air suits
Disposable surgical drapes, gowns, air suits and face masks
Professional cleaning services for passenger trains
Cleaning services for metro, light rail and tram
All professional cleaning services for passenger trains for internal and external surfaces of passenger coaches
Declared unit or functional unit with conversion factors
Reference flow defined at customer gate, retailer shelf or marketplace
All elements of shower enclosure: panels, profiles, doors, handles, hinges; walk-in and shower screen products
Globally applicable; European countries compliant with EN 14428
Shower enclosures composed of 1 to 4 sides with steel or aluminium profiles and glass or plastics transparent panels
Efficient heat transfer fluids for heating and cooling
Fluid added to the heating and cooling systems not for heat transfer such as descaling, anti-corrosion agents
Plastic shopping bags; products not closable at point of filling
Closable flexible plastic packaging that is sealed at point of filling, including polymeric films, laminates, adhesives,
Closable flexible plastic packaging - bags, envelopes, pouches, sachets, wraps, lids made of film, foil, or paper sheeti
Crates exceeding specified size, boxes, bags, sacks, non-stiff materials, bowls, stoppers, lids, caps and closures of pl
Crates with external dimension ≤800mm x 600mm x 1000mm and/or load weight up to 200kg, including returnable crates and a
Crates for food derived from wood, polymer and paper materials used in contact with foods
Moka coffee, filter coffee, instant coffee; professional and commercial/industrial espresso; non-COMITCAF compliant beve
Espresso coffee meeting COMITCAF criteria; can be made by capsules, pods, roast & ground, roasted beans systems
Espresso coffee - coffee beverage brewed by forcing nearly boiling water under pressure through finely ground coffee bea
Service of providing washed and sterilized reusable surgical drapes and gowns used for patients and clinical staff
Service life calculated based on N times of sterilization
Washing and sterilization of reusable surgical masks and capes
Vessel salvage and refloating services (UN CPC 6753), warehousing, stripping, repackaging, and other value added service
Port operation activities including general activities, nautical activities, passenger activities, and cargo handling an
Port operation services for commercial seaports
Waste washing processes for production of aggregates
Washing technologies of non-hazardous waste from street sweeping, drain cleaning, sieving operations, and desanders; fin
Woven, knitted and crocheted fabrics of naturals fibres (except silk), for apparel sector (expired)
UN CPC 265 (EXCEPT 2651), UN CPC 266, UN CPC 281
Companies and organizations seeking to present transparent information about life cycle environmental impact
Denim, poplin, lawn, pure linen, gabardine, single and double jersey, tartan, tweed, twill, broadcloth, rib, flannel, ve
Woven, knitted and crocheted fabrics of natural fibres (except silk), for apparel sector
Being updated - Boards, blocks, panels, sheets of plastics, or in composite system, for structural application (non-construction)
Strips; films and sheets without mechanical properties for use in composite systems
Core materials of plastic or formulated with polymeric binder (e.g. balsa core materials) used in composite systems or a
Boards, blocks, panels, sheets of plastics, or in composite system, for structural application (non-construction)
Point where product arrives at customer gate, including losses before that point
Melons and watermelons are classified as vegetables
Upstream: land use transformation, crop establishment, seeds, fertilizers, agrichemicals, packaging, water extraction, w
Fruits and nuts including tropical/subtropical fruits, citrus fruits, grapes, pome fruits, stone fruits, berries, fruit
ISO 14025, ISO 14040/14044, EN 15804, General Programme Instructions version 3.0
Declared unit (mandatory); functional unit optional
Extracts of tea, extracts of herbal and fruit infusions, ready-to-drink teas, coffee-based drinks, cocoa-based drinks
Loose leaf and bagged tea, herbal and fruit infusions with and without added flavours
Agriculture, production of plants/seeds/cuttings, fertilizers, agro-chemicals, electricity, fuels, other ingredients, au
Tea and herbal tea and fruit infusions (HFI) in immediate packagings not exceeding 3 kg
Woven fabrics of silk and silk-like fibers
Knitting fabrics for sportswear (UN CPC 267)
Woven fabrics of silk and silk-like fibres
Jackets, coats and other similar outdoor garments
PCR Basic Module, CPC Division 28 Knitted or crocheted fabrics, wearing apparel, version 3.0
Sweaters, jerseys, pullovers, cardigans, fleeces and similar garments
Trousers, shorts and slacks and similar garments (expired)
Trousers, shorts and slacks and similar garments corresponding to CN codes 6103, 6104, 6203 and 6204
T-shirts, tops, singlets and other vests
T-shirts, tops, singlets and other vests knitted or crocheted
Espresso coffee, filter coffee, instant coffee, professional and commercial/industrial market
Moka coffee prepared with Moka pot filled with roast and ground coffee (excluding soluble coffee), 3 cup Moka pot refere
Fish, otherwise prepared or preserved; caviar and caviar substitutes
At customer gate, shelf, retailer or marketplace
Prepared and preserved vegetable and fruit products, including juice
Prepared and preserved vegetables, pulses, potatoes, fruit and nuts, plant dairy products, and mixtures of fruit and veg
AC and DC gear motors for automation systems
Electrical equipment (gear motors) designed for opening/closing systems including swing gates, sliding gates, barrier ga
Being updated - Liquid immersed power transformers (>25 MVA) (expired)
Allocation rules specified in section 4.6
System boundary specified in section 4.3
ISO 14025, ISO 14040/14044, General Programme Instructions version 3.0, PCR Basic Module CPC Division 46 version 3.01
Impact categories and impact assessment specified in section 4.9
Reference service life (RSL) specified in section 4.2
Companies or organisations declaring environmental performance of liquid immersed power transformers
Liquid immersed electrical products including shunt reactors, series reactors, phase shifting transformers, converter tr
Data quality requirements specified in section 4.7
Liquid immersed power transformers with power >25MVA (medium power 25<P<40MVA and large power P>40MVA)
Recommended databases for generic data specified in section 4.8
Being updated - Cement and building lime (EN 16908) (c-PCR to PCR 2019:14)
Basic glass products according to EN 572-1:2012+A1:2016, flat glass products
Granular and micronized stone from quarry
At the processing/blending company gate, at the shelf or the retailer or at the market place
Micronized materials not derived from natural stones; materials with granulometry higher than 200 µm; construction produ
Micronized stone from natural stone with granulometry lower than 200 µm used as additive in zootechnic, agri-food, pharm
Micronized stone from quarry - ultra-fine powder obtained from rock grinding with granulometry lower than 200 µm
Professional laundry and cleaning services of items
Surfaces, surgical drapes and gowns, building cleaning services, passenger train cleaning services
Only environmental impact results of EPDs referring to same types of item can be compared
Extraction and production of raw materials, consumables, chemicals, packaging, machinery, equipment, capital goods, repl
Professional laundry and cleaning services of items including textiles, reusable cleanroom garments, mattresses, pillows
Synthetic and artificial staple fibres, filaments and tows-tops for apparel, home textile and upholstery
Man-made staple fibres, filaments and tows-tops processed for textile sector
Textile manufacturing services, non-apparel fabrics made of natural fibres other than cotton
UN CPC 8821; UN CPC 265, UN CPC 281, UN CPC 27922
Woven, knitted, crocheted or nonwoven fabrics from natural fibres other than cotton for agriculture, carpeting, furnishi
Textile manufacturing services of fabrics made of natural fibres other than cotton, for non-apparel uses
EPD shall specify product group and CPC code if available
Cereals (wheat, maize, rice, sorghum, barley, rye, oats, millet), Vegetables (leafy, melons, fruit-bearing, leguminous,
Arable crops and Vegetables including cereals, vegetables, oilseeds, pulses and forage products
Transport services including passenger transport, freight transport, postal and courier services
Refrigerator and freezer (c-PCR under PCR 2024:06)
Road marking systems (under PCR 2019:14)
Raised pavement markers are excluded from this c-PCR
Road marking materials used to enforce traffic rules and guide drivers, pedestrians, cyclists, and other road users
Companies or organisations declaring environmental performance of industrial furnaces and ovens
Industrial furnaces and ovens, except non-electric bakery ovens; other industrial or laboratory induction or dielectric
Electrical switchgear and control gear solutions (c-PCR under 2024:06)
External verification by Technical Committee of EPD International acting as PCR Review Panel
PCR 2024:06 Electronic and electric components (non-construction)
Electrical switchgear and control gear solutions
Being updated - Basic aluminium products and special alloys
Declared unit (specific unit to be defined per product)
Cradle-to-gate (from mining/recycling through production and casting)
ISO 14025:2006, ISO 14040:2006, ISO 14044:2006, EN 15804, ISO 21930, General Programme Instructions version 4.0
Aluminium destined for construction products; further processing to obtain finished consumer products
Ingots, billets, plates, tubes, bars and other semi-finished products of solid aluminium and aluminium in liquid form; p
Basic aluminium products and special alloys - semi-finished products of aluminium or aluminium alloys, excluding constru
Prefabricated buildings intended as special-purpose transportable units (c-PCR to PCR 2019:14)
One day of effective usage of a prefabricated building
Mobile non-sewer-connected toilet cabins as defined by EN 16194:2012
Prefabricated buildings intended as special-purpose transportable units
Transportable prefabricated buildings, either unassembled or fully assembled and ready to use, designed for use as toile
Building hardware (EN 17610) (c-PCR to PCR 2019:14)
Building hardware products for opening/closing doors, gates, windows, shutters; locking/unlocking hardware; electromecha
c-PCR Wood flooring including parquet (EN standard)
c-PCR Aggregates intended as unbound mixtures, railway ballast or armourstones
Desiccant dehumidifiers (c-PCR to PCR 2019:14)
Desiccant dehumidifiers - units whose primary purpose is to extract moisture from air using desiccant media
Reference service life determined by technical and esthetical aspects per QB/T 1333:2018 standard
Different applications and target audiences
Luggage and handbags with or without plastic/metal/paperboard accessories
HS 2007 subheading 8415.83 (fan coils without refrigerating unit), UN CPC 43913
Products incorporating a refrigerating unit per HS 2007 subheadings 8415.10, 8415.81, 8415.82
Air-conditioning machines with capacity limit <= 12 kW for residential and tertiary sector
Environmental impacts of contained product; products not usable for handling goods; recycling for same purpose after tra
All packaging products independent of material composition, dimensions or service life; both single-use and reusable pac
Under development - Electric motorbikes and electric micromobility vehicles
Fabricated metal products, except construction products (2.0.1)
Bearings, bearing units, parts thereof, construction metal products, basic not finished metals, semi-finished metals, in
Naval chains, tools, shafts for automotive industry, tubes, pipes and hollow profiles, cooking utensils, machine metal p
Fabricated metal products, except construction products, machinery and equipment
Flexible sheets for waterproofing (EN 17388)
Reinforced bitumen, plastic and rubber flexible sheets intended for roof waterproofing according to EN 13707 and EN 1395
Industrial sensors (c-PCR under PCR 2024:06)
Industrial sensors used in process instrumentation, analytical applications, and force measurement
Raw milk, processed milk and cream, yoghurt, butter and cheese
Fabricated metal products, except construction products (1.0.3)
Electronic and electric equipment, and electronic components (non-construction) (main PCR to be complemented by c-PCRs)
Life-cycle stages A1-D (cradle-to-grave with optional benefits/loads beyond)
Environmental performance indicators specified
Data quality requirements for specific data specified
Functional or declared unit allowed when using main PCR only; functional unit prescribed by c-PCR when applicable
EPD content and format requirements specified including cover page, programme information, product information, content
Global (no specific geographical restriction stated)
Electronic and electric equipment, and electronic components (non-construction)
Generic data from databases required; examples of databases provided
Allocation of waste treatment processes specified
Construction of Levees, Dykes and Embankments (c-PCR under PCR 2019:14)
A1-A3 (Product stage) and A4-A5 (Construction stage) as mandatory modules
River levees, sea levees, floodwalls, slopes and supporting facilities such as drainage channels and relief canals
Environmental performance assessment and declaration of construction service of levees, dykes and embankments
Construction of Levees, Dykes and Embankments
Point where product arrives at customer gate
Ski-boots, snowboard boots, cross-country ski footwear for Alpine skiing, Nordic skiing, Snowboarding, Ski mountaineerin
PCR 2024:05 Respiratory protection devices (RPD)
Respiratory protective devices (RPD) - devices designed to protect the wearer from inhaling hazardous or contaminated ai
c-PCR Precast lightweight concrete with an open structure and precast autoclaved aerated concrete (prEN 18185)
c-PCR Ventilation components (EN standard)
EPD content and format requirements specified in Section 5
Pure basic chemicals or mixtures of basic chemicals; basic chemicals diluted in solvents; products from renewable and no
Basic Chemicals corresponding to UN CPC Group 341, 342 (except subclass 3429), 343, 345 (except subclass 3451)
Abrasive products (c-PCR to PCR 2019:14)
Functional unit preferred; declared unit allowed if use stage unknown
Products not covered by UN CPC 3791 and 35333 unless approved by moderator; products covered by other c-PCRs
Abrasive products including grinding wheels, abrasive powders/grains, and polishes/creams
External/independent verification by Technical Committee
Modules A (product stage), B (use stage), C (end-of-life), D (benefits/loads beyond)
Buildings built on site, buildings with prefabricated parts, and entirely prefabricated buildings; entire building or co
EPD shall follow format according to PCR 2024:06
PCR 2024:06 Electronic and electric components (non-construction), as defined in PSR-0014-ed2.0
Content declaration mandatory as specified in PCR 2024:06
PV components: inverters, battery energy storage systems, combiner boxed and tracker systems (c-PCR to PCR 2019:14)
Cradle to grave with module D (A + B + C + D)
PV inverters, PV battery energy storage systems, combiner boxes, tracker systems for standalone modules or BIPV
PV components: inverters, battery energy storage systems, combiner boxes and tracker systems
Under development - c-PCR Road materials
c-PCR Steel, iron and aluminium structural products, and other metal products, for use in construction works (prEN 17662)
Processed paper and paperboard, including corrugated paper
Point where product arrives at customer gate, including losses before delivery
All graphite products covered by UN CPC subclasses 37950, 37990, 46950, including natural graphite from flake and vein d
Technical specifications including purity, particle size distribution, and intended market use shall be declared
Graphite products including natural and artificial (synthetic) graphite
Wind towers onshore and offshore (c-PCR to 2019:14)
Asphalts, bitumen, slack waxes, oils from bituminous materials
Vacuum process, de-asphalted process, removal of aromatics process, separation process, hydrogenation process
Paraffin waxes from Fuel Oil Atmospheric (FOA) processing
Ceramic tiles produced by extrusion and dry-pressing techniques, mainly used for internal and/or external floorings and
c-PCR Plastic piping system buried outside the building structure (EN 16903)
GPR pipes and fittings, and district heating pipes
Plastic piping systems buried outside buildings
Electric vehicle charging infrastructures (c-PCR under PCR 2024:06)
EPD shall follow the format according to PCR 2024:06
PCR 2024:06 Electronic and electric components (non-construction), as defined in PSR-0018-ed1.3
EPD shall include all mandatory declarations specified in PCR 2024:06 (e.g., share of specific data and content declarat
Electric vehicle charging infrastructures
Technical ceramic grains and powders (non-construction)
External PCR for Construction Aggregates
Fabrics under PCR 2019:14 Construction products and nonwoven fabrics
Woven, tufted, knitted, crocheted, special and other fabric types
Under development - Bakery products (c-PCR to main PCR Food and beverage products)
ISO 14025, ISO 14040/14044, General Programme Instructions version 3.01
Density, moisture content and carbon content all related to dry matter; bark weight information where not included
Timber or lumber, pulpwood, fuel wood/firewood, biomass branches and tops from harvesting used for energy production
Basic products from forestry - intermediate products from silviculture and forestry activities including timber, pulpwoo
c-PCR Vitrified clay pipe systems for drains and sewers (EN standard)
c-PCR Aggregates intended to be physically integrated in mortar, concrete, bituminous mixtures, or hydraulically bound mixtures
Buttons and fasteners for fashion products
Construction products (EN 15804+A2) (version 2.0.1)
EN 15804+A2 core and additional indicators required; ISO 21930 indicators for geographical context; GWP-GHG additionally
Allocation rules further specified by merging ISO 21930 specifications to EN 15804 stepwise procedure
Primary data required for processes where producer has operational control (module A3 for goods, A4-A5 for services); ma
Declared unit or functional unit depending on EPD type
This is a main PCR that may be complemented with complementary PCRs (c-PCRs)
EPD shall specify product category in accordance with UN CPC classification system if possible; sections defined in Sect
EPD validity period determined by PCR validity (2030-04-07)
Content/material declaration required with additional requirements compared to EN 15804 and ISO 21930
Biogenic carbon content of product and packaging shall be declared as kg CO2 eq. per product or declared unit for ISO 21
c-PCR Air filters for ventilation for buildings (EN standard)
Being updated - Electrical motors and generators and parts thereof
Functional unit for motors and generators; declared unit for parts
Gear motors for automation systems (covered by PCR 2019:11). Other parts than rotors and stators are excluded.
Electrical motors and generators for industry applications and parts thereof (rotors and stators)
Technical-chemical products (for construction sector)
At customer gate, shelf or retailer or marketplace
Crustaceans, molluscs, caviar, inedible fishmeal, prepared/preserved fish (CPC 2124-2129)
Fish from seawater or freshwater, wild caught or aquaculture, intended for human consumption
Fish fillets and meat; fish livers and roes; live, fresh, chilled, frozen, dried, salted, smoked fish for human consumpt
c-PCR Road restraint systems (EN standard)
Rehabilitation projects of highways, streets and roads (covered by C-PCR-012)
Road Infrastructure including pavements, bridges, tunnels, safety barriers or specific parts thereof
c-PCR Fasteners and connectors in timber structures (EN standard)
c-PCR Rooflights and roof hatches (prEN 18189)
Gypsum-based construction products (EN 17328)
All gypsum-based construction products; three product families: board products, powder products and cast products
Gypsum-based construction products including board products, powder products and cast products
Concrete batching plants (c-PCR under PCR 2019:14)
A1-A3 (product stage), A4-A5 (construction process stage), B1-B7 (use stage), C1-C4 (end-of-life stage), D (benefits and
Technical characteristics, performance, main components, spare parts, energy consumption, and designed technical lifespa
Concrete batching plants - systems that combine aggregates, binder and solid additives with water and liquid additives t
Electrical cables and wires (for construction sector) (c-PCR to PCR 2019:14)
c-PCR Road traffic noise reducing devices (prEN 17383)
Curtain walling as defined in EN 13830:2015+A1:2020, excluding openable infills
Bituminous mixtures (EN standard) (c-PCR to PCR 2019:14
Under development - Batteries and parts thereof (c-PCR under PCR 2024:06)
Windows and doors (EN 17213) (c-PCR to PCR 2019:14) - Version 2.0.0
Windows and doors of any materials, not just iron, steel, aluminium, or wood
Windows and pedestrian doorsets as defined in EN 14351-1 and EN 14351-2
Construction products (EN 15804+A2) (version 1.3.4)
Co-product allocation procedure specified by merging ISO 21930 specifications with EN 15804 stepwise procedure
Cradle-to-gate with options for A4-A5, B, C1-C4, and D modules
Core and additional indicators from EN 15804:2012+A2:2019/AC:2021, with option to report ISO 21930 and EN 15804:2012+A1:
GWP-GHG indicator shall be reported as supplementary indicator in kg CO2 eq./kWh for electricity purchased in A3
Product stage A1-A3 is mandatory and shall be declared in aggregated form
Environmental Product Declarations (EPD) are voluntary documents for a company or organisation to present transparent in
Additional requirements and recommendations on content declaration compared to EN 15804 and ISO 21930
Any presses for the extrusion of metal (e.g. aluminium profiles, hard alloy, copper and brass)
Mandatory technical information including commercial name, type of metal working, type of metal worked, nominal force, i
Presses for working metal, including machine-tools for forging, hammering, die-stamping, bending, folding, straightening
c-PCR Double skin metal faced insulating sandwich panels for roofing and cladding (prEN 18159)
Wires, cables and accessories, except construction products (c-PCR under PCR 2024:06)
Wires, cables and accessories for construction products
All mandatory declarations specified in PCR 2024:06 required
Wires, cables and accessories, except construction products
Construction products and construction services (EN 15804:A1) (expired)
External verification with surveillance follow-up during validity period
Non-permanent products in construction works or products that do not have any effect on the performance of the construct
Construction products and construction services for buildings and other construction works
Acoustic helmets, noise cancelling headphones, amplification devices for hearing loss, products for comfort when sleepin
Normally five years from version date or until de-registration
Custom moulded earplugs, Preformed earplugs, Banded earplugs, Push-to-fit earplugs, Foam earplugs, Formable earplugs, He
Hearing Protection Devices (HPDs) - devices worn by a person to prevent harmful effects from noise and other loud acoust
Furniture and components of furniture (c-PCR to PCR 2019:14) (adopted from EPD Norway)
Furniture and components of furniture as defined in NPCR 026:2024, corresponding to UN CPC 381
External PCR for Office Furniture Workspace Products (Version 2.0)
Escalators and moving walks (c-PCR to PCR 2019:14)
Companies and industry associations developing EPDs for escalators and moving walks
Skip hoists, lifts (elevators), and products used in non-construction applications
Escalators and moving walks (horizontal, inclined up to 12°, and escalators 12° to 35°) used as construction products
Escalators and moving walks designed for transportation of passengers with inclined or horizontal trajectories
UN CPC 9692 (Gambling and betting services), 9614 (Motion picture distribution), 9623 (Performing arts facility operatio
Under development - Fibres for textile production
Global applicability; data shall be representative for site/region where process takes place
Fibres for textile sector including synthetic polymers, natural polymers, plant-based natural fibres, animal fibres, and
Kaolin and clay products (non-construction)
Expanded kaolin and construction applications
ISO 14025:2006, ISO 14040:2006, ISO 14044:2006, EN 15804, ISO 21930, General Programme Instructions (GPI) version 4.0
English; Bahasa Indonesia version set to be released soon
Reference flow defined at customer transfer point; losses before transfer point must be accounted for
Refinery processes including coke oven products, refined petroleum products, nuclear fuel, refinery oil products, and ga
Systems producing natural gas, crude oil, and combined natural gas-crude oil production systems
Crude petroleum and natural gas corresponding to UN CPC Division 12, including crude petroleum oils, natural gas (liquef
Tonnes of oil equivalent (TOE) conversion to MJ as energy content; conversion factors for barrel of oil or MMSCF of gas
c-PCR Fibre cement products (EN standard)
Rehabilitation services for highways, streets and roads (c-PCR to PCR 2019:14)
Cradle to gate (A1-A5), Cradle to grave (A1-A5 + B1-B2 + B6-B7), Cradle to gate and module D (A1-A5 + D), Cradle to grav
Review panel: Technical Committee of the International EPD System
Reference Service Life (RSL) is the period between rehabilitation projects
Study and design stage of rehabilitation works shall be included
construction of new elements or use of new techniques including electronic products like HVAC products that modify Servi
Raw material supply (A1) includes extraction, milling, on-site/off-site recycling, waste processing, transportation of r
Rehabilitation Projects of Highways, Streets and Roads
Environmental performance of compounds must be calculated following PCR 2018:04 Asphalt mixtures or PCR 2019:14 and appl
Maintenance of auxiliary elements like signposting, road lighting, painting, crash barriers shall not be included
System boundary includes maintenance works after rehabilitation and before next rehabilitation work; excludes auxiliary
c-PCR Vitrified clay piping systems for buried vitrified clay pipes (EN standard)
Lifts (elevators) (c-PCR to PCR 2019:14) (Version 2.0.0)
Skip hoists, escalators, moving walkways, and products used in non-construction applications
Lifts designed for transportation of persons or freights (goods and materials), or both with vertical or inclined trajec
Substantial materials for air ducts (c-PCR to PCR 2019:14)
RSL is optional for type a) EPDs, and mandatory for type b) if any module in B is included
Conversion factors to mass per declared unit shall be provided for scenarios
Ducts for smoke extraction, fire-resistant ducts, entire ducts/ventilation channels, duct fittings, other ventilation un
Substantial materials used for the realization of air ducts for ventilation and air-conditioning of buildings
Wind Turbine Blades for wind energy generation (c-PCR to 2019:14)
Lubricants, greases, synthetic oils, metalworking fluids
Medical Mobility Devices and Care Assistive Products
Bearings, bearings units and parts thereof
Ball or roller bearings (UN CPC 4331), bearing housings and plain shaft bearings (subset of UN CPC 4332), and parts for
Bearings, bearing units and parts thereof including ball or roller bearings, bearing housings, plain shaft bearings, and
Clothes or linen washing machines (c-PCR under PCR 2024:06)
Rare earth concentrates, oxides, metals, and magnets (for non-construction uses)
Products used in the construction sector
REE-bearing ores, REE mineral concentrates, mixed REE concentrates, mixed REOs, mixed REE metal alloys, separated REOs,
Rare-earth concentrates, oxides, metals and magnets for non-construction uses
Evaluation of environmental impact of railway infrastructure projects in planning/design phase or as built
Railway infrastructure including track, stations, bridges, tunnels or specific parts thereof
Pulps of wood or other fibrous cellulosic material
Pulp made from lignocellulosic fibrous materials derived from wood or non-wood sources (such as fibre crops or recycled
Photovoltaic modules and parts thereof (c-PCR to PCR 2019:14)
Machine-tools for material working by removal of material
Machine-tools for working any material by removal of material by laser or similar process
Cradle to grave for final products; cradle to gate (plus transport to retailer/distribution platform) for intermediate p
Films used directly and exclusively for packaging
Conversion factor to 1 kg of film shall be declared
c-PCR Fly ash for concrete (EN standard)
Colony Forming Unit (CFU) per gram expressed in scientific notation
Being adopted - Thermodynamic generators with electric compression for heating and/or cooling of premises and/or the production of domestic hot water (c-PCR under PCR 2024:06)
Bituminous mixtures (c-PCR to PCR 2019:14)
c-PCR Plastic piping system inside the building structure (EN 16904)
Plastic piping systems inside the building structure
Biochar with known final use covered by other PCRs (fertilizer, animal feed additive); construction use covered by PCR 2
Biochar at gate of pyrolysis technologies with packaging
Biochar derived from pyrolysis processes
Ventilation components (c-PCR under PCR 2019:14)
2012:01-sub-PCR-N Photovoltaic modules and parts thereof (expired)
Footwear with outer soles and uppers of rubber, plastics, leather or textile materials; sports footwear; other footwear
Under development - Waste and scrap recovery (recycling) services
Products incorporating a refrigerating unit (HS 2007 8415.10, 8415.81, 8415.82); UN CPC 43913 Refrigerating and freezing
Factory-made single assembly with liquid-to-air heat exchanger and fan, providing forced circulation of air, heating, co
Hydronic Fan Coil Unit (FCU) with air free delivery and air ducted with maximum external static pressure of 120 Pa
A1-A3 (product stage), A4-A5 (construction process stage), B1-B7 (usage), C1-C4 (end of life), D (benefits and loads bey
Default service life corresponds to building design life of 50 or 60 years
End-of-life scenarios shall be relevant for markets where EPD is used; end-of-life fate of each component shall be handl
Companies or industry associations developing EPDs for acoustic ceiling and wall solutions
EPD shall include text describing transportation scenario, installation resource use calculation/measurement method, and
1 m² of installed acoustic panels including service life and declared acoustic performance class
Content declaration required for all components; end-of-life fate of each component must be specified
Acoustic ceiling and wall solutions including suspended/direct fixed ceilings, baffles, and vertically mounted elements/
Corrosion protection of fabricated steel products (c-PCR under PCR 2019:14)
Synthetic carpet yarn (construction product) (c-PCR to PCR 2019:14)
Cradle to gate with modules C1-C4 and module D (A1-A3 + C + D)
A1-A3 (Product stage), C1-C4 (End-of-life stage), D (Benefits and loads beyond system boundary)
EPD shall include declared unit, system boundary, life cycle stages, and environmental impact per declared unit
All synthetic yarn used for building purposes (e.g. in floor, roof, ceiling, walls, etc.)
EPDs are only comparable if performance characteristics described in product specifications are equivalent
Synthetic carpet yarn (construction product)
Tableware and kitchenware - all products designed to come into contact with food for preparing, serving and consuming fo
Soft drink manufacturers and distributors
At customer gate, at shelf of retailer or at marketplace, including all losses before that point
Sweetened or flavoured bottle waters, extracts of tea, extracts of herbal and fruit infusions, ready-to-drink teas, coff
Soft drinks - non-alcoholic caloric beverages including carbonated drinks, flavoured waters, ready-to-drink teas, coffee
Solid waste collection, treatment and disposal services
Glass products used in automotive and transport industry
Products used in other applications such as construction
A pair of soles (Eurosize 42) for footwear
Hygienic/pharmaceutical articles (HS 4014), articles from HS 4016 and 4017 not used for walking support
Common soles for footwear manufacturing and rubber soles for footwear maintenance
Rubber articles for footwear - vulcanized rubber articles used in footwear manufacturing for outsole and midsole
UN CPC codes 21, 22, 23, 24 (food and beverage products)
Food and beverage products - any edible or drinkable product, and upstream raw materials and intermediate products there
Fur apparel, leather apparel, non-textile products of sub-category 2826
Apparel, except fur and leather apparel, corresponding to UN CPC code 282 Wearing apparel
PEFCR for Apparel and Footwear v3.1 (Product Environmental Footprint Category Rules)
DQR of the PEF study with data quality rating
Cradle-to-grave with modules A1-A5, B1-B7, C1-C4, and D
Verification requirements for PEF studies and pre-verified tools
Company-specific datasets required with data quality requirements
Product lifetime with default duration of service and intrinsic durability assessment
End-of-life scenarios with collection and transport
Washing/cleaning, drying, ironing/steaming, and footwear care
Review panel and review requirements of the PEFCR
Does not allow use of single score for business to consumer communications or comparison against representative products
Voluntary tool to identify environmental hotspots and help reduce environmental impacts; support factual communication o
Cascale (former Sustainable Apparel Coalition)
Fibre fragment impact calculation for marine biota
Product Environmental Footprint Category Rules (PEFCR) Apparel and Footwear
ILCD-EL compliant proxies required for specific processes
End-of-life scenarios and recycled content modelling
Additional environmental information including fibre fragment impact
IBU PCR Part A (general programme rules) — URL TODO (portal is JS-gated)
Environmental Footprint impact categories
Raw material acquisition, Pre-processing, Manufacturing, Distribution, Use stage, End of life
Indoor wall paint, Indoor wood paint, Outdoor wall paint, Outdoor wood paint
CEPE: European Council of the Paint, Printing Ink and Artists' Colours Industry
Product Environmental Footprint Category Rules - Decorative Paints
Data quality rating (DQR) parameter assessment for company-specific and secondary datasets
Cradle-to-gate and cradle-to-grave depending on application
List of the impact categories to be used to calculate the PEF profile
Raw materials acquisition, Manufacturing, Logistics, Packaging, Installation, Use/maintenance/refurbishment, Demolishing
Default parameters for transport of raw materials, ancillary products, packaging, and thermal insulation product
Product Environmental Footprint Category Rules (PEFCRs) for thermal insulation
Product Environmental Footprint (PEF) method and EN 15804+A2
Environmental Footprint (EF) 3.1 midpoint impact categories
Primary and secondary data required with specific data quality requirements
Raw milk supply, dairy processing, packaging, distribution, use stage, and end of life
Enables comparative assessment of different products from the same sub-category only, not across sub-categories or with
Dairy products including liquid milk, dried whey products, cheeses, fermented milk products, and butterfat products
Product Environmental Footprint Category Rules for Dairy Products
Multi-functionality decision hierarchy applied at dairy farm and dairy processing
Additional environmental information including impact on biodiversity
Allocation rules specified for co-products
Data Quality Rating (DQR) method required
16 impact categories including acidification, climate change, and others
Circular Footprint Formula (CFF) applicable
Company-specific data mandatory for feed mill operations
Functional unit and reference flow defined
Geographic validity specified in document
Feed ingredients content declaration mandatory
Product Environmental Footprint Category Rules for Feed for food producing animals
Global Feed LCA Institute (GFLI) database and ILCD
Data Quality Rating (DQR) assessment required
System boundary defined with life cycle stages
Review Panel and Review Requirements specified
Modelling of wastes and recycled content required
Allocation rules specified in section 5.8
Cradle-to-gate and cradle-to-grave stages included
Independent external expert verification required
Biogenic carbon storage modelling included in Annex 6
Company-specific data required for mandatory processes
Life cycle stages A1-A5, B1-B7, C1-C4 and D
Organic grape and participation in relevant certification schemes to be reported
Product Environmental Footprint Category Rules (PEFCR) for still and sparkling wine
Modelling of wastes and recycled content specified in section 5.11
Additional environmental information including long-term carbon storage, biodiversity, organic grape certification, and
Data Quality Rating (DQR) assessment method
Cradle-to-grave including use stage and end-of-life
Raw material acquisition, manufacturing, distribution, use stage, packaging end-of-life
List of ingredients and packaging materials
Product Environmental Footprint Category Rules for Dry pasta
Modelling of wastes and recycled content
List of impact categories for PEF profile calculation
Voluntary or mandatory programmes, in-house applications
Bottled drinking water, natural mineral water, spring water
European Federation of Bottled Waters (EFBW)
Packed water (bottled drinking water, natural mineral water, spring water)
Product Environmental Footprint Category Rules (PEFCRs) for Packed water
Environmental Footprint impact assessment
Data Quality Rating (DQR) semi-quantitative assessment method
EF3.1 impact assessment method with 16 impact categories
Company-specific (primary) data required for mandatory processes
Life cycle stages from fishing/farming through end-of-life
Cut-off rules specified for system boundary
Business to Business (B2B) and Business to Consumer (B2C)
Review panel established for PEFCR development
Comparative assertions allowed only between products performing same function
Bill of materials (BoM) and bill of components required
Data quality rating (DQR) includes time-related representativeness
Unprocessed marine fish products (wild and farmed)
Product Environmental Footprint Category Rules (PEFCR) for Unprocessed Marine Fish Products
Geographical representativeness required in DQR assessment
Circular Footprint Formula (CFF) for end-of-life allocation
Environmental Footprint 3.1 (EF3.1) 16 indicators
Technological representativeness required in DQR assessment
Data Quality Rating (DQR) assessment methodology
Classification of Products by Activity (CPA)
Cradle-to-gate with optional modules for construction and end-of-life
Environmental Footprint methodology and EN standards
Critical review by review panel required
EF impact assessment with 16 Environmental Footprint indicators
Circular Footprint Formula (CFF) for chromium recovery
Biogenic stored carbon (BSC) and stored carbon from chemicals (SCC) accounting
Life cycle stages A1-A3 (product stage), A4-A5 (construction), B1-B7 (use), C1-C4 (end-of-life), D (benefits/loads)
Reference service life scenarios for leather products
End-of-life scenarios specified in Annex 6
Review panel members specified in Table 3
European Union with geographic validity specified
Material content and composition declaration required
Leather Pilot Technical Secretariat (UNIC, COTANCE, SSSUP, Spin 360)
Product Environmental Footprint Category Rules for Leather
Secondary datasets from LCI databases required
Modelling of wastes and recycled content specified
Cradle-to-gate for production; includes use stage and end-of-life
Environmental Footprint impact categories as per EF methodology
Geographic validity not explicitly specified in scope section
Modelling of waste and recycled content specified
Commission Recommendation 2013/179/EU and PEFCR Guidance document Version 6.3
EF impact categories as specified in Table 5
Circular Footprint Formula to be applied
Life cycle stages including pre-processing, manufacturing, distribution, installation, use, and end-of-life
European Union and European Economic Area
Hot and cold water supply plastic piping systems in buildings
Product Environmental Footprint Category Rules (PEFCR) for hot and cold water supply plastic piping systems in the build
PEFCR Household Heavy Duty Liquid Detergents
PEF method and EU Environmental Footprint guidance
External independent verification by Review Panel
Impact categories as per PEF guidance v6.3 requirements
Company-specific data required for bill of ingredients and packaging materials
Life cycle stages including raw material acquisition, manufacturing, distribution, use stage, and end of life
Review Panel required for PEFCR verification
Bill of ingredients and bill of materials for packaging required
A.I.S.E. (International Association for Soaps, Detergents and Maintenance Products)
Household Heavy Duty Liquid Laundry Detergents (HDLLD) for machine wash
Product Environmental Footprint Category Rules (PEFCR) for Household Heavy Duty Liquid Laundry Detergents (HDLLD) for ma
Circular Footprint Formula (CFF) for recycled content allocation
Data Quality Rating (DQR) requirements specified
Verification requirements specified in section 8
All default Environmental Footprint (EF) impact categories and additional environmental information on energy, biodivers
Circular Footprint Formula (CFF) referenced in allocation rules
Review panel and review requirements specified in section 2.3
Geographic validity specified in section 2.5
Allocation rules for recycled content and end-of-life specified
EF impact categories with additional information on AOX and COD
Data Quality Rating (DQR) based on Technological representativeness, Geographical representativeness, Time-related repre
Cradle-to-gate and end-of-life stages included
PEFCR Guidance ver. 6.3 (May 2018), PEF Guide, ISO 14025:2006, ISO 14040-44:2006, ENVIFOOD Protocol
Circular Footprint Formula (CFF) and modular form (CFF-M) applied
Raw material acquisition, pre-processing, manufacturing, distribution, end-of-life
PEF results, benchmark values, PEF profile, additional technical and environmental information
Metal sheet compositions and alloy content declaration required
Metal sheets (aluminium, copper, lead, steel) for various applications
Product Environmental Footprint Category Rules (PEFCR) for Metal Sheets for Various Applications
Recycling and end-of-life allocation rules specified
Environmental Footprint indicators required
Data Quality Rating (DQR) assessment based on technological, geographical, temporal representativeness and precision
PEF Guide, PEFCR Guidance, ISO 14040, ISO 14025, ISO 14071
Independent external verification required
Life cycle stages A1-A3 (product), A4-A5 (construction), B1-B7 (use), C1-C4 (end-of-life)
Photovoltaic modules used in photovoltaic power systems for electricity generation
Product Environmental Footprint Category Rules (PEFCR) for Photovoltaic Modules
PEFCR Uninterruptible Power Supply (UPS)
Life-cycle stages from raw material to end of life
EF impact assessment with impact categories listed in Table 6
Circular footprint formula (CFF) applied
Company-specific data requirements defined
Lifetime defined for different UPS types
End of life stage requirements and assumptions
Operating profiles and energy consumption scenarios
PEFCR review panel and review requirements defined
Geographic validity described in section 2.5
Background database requirements specified
Modelling of wastes and recycled content with CFF
Additional environmental information including manufacturing, use, end of life, and biodiversity
Data Quality Rating (DQR) based on Technological, Geographical, Time-related representativeness, and Precision
Product Environmental Footprint Category Rules (PEFCR) for T-shirts
Product Environmental Footprint (PEF) methodology developed by the European Commission's Joint Research Centre (JRC)
System boundaries include: ingredients, packaging production, pet food manufacturing, distribution, use and packaging en
The PEFCR shall enable comparative assessment of different products from the same sub-category
Compliance with the present PEFCR is optional for PEF in-house applications, whilst it is mandatory whenever the results
Prepared pet food for cats and dogs - complete meals for cats and dogs sold in the EU market for four sub-categories: we
Product Environmental Footprint Category Rules (PEFCRs): Prepared pet food for cats and dogs
Data Quality Rating (DQR) method applied; average DQR calculated
Product Environmental Footprint Guidance (PEF Guidance) EC 2021; ISO 14040/14044
External verification required; verifier requirements specified
EF impact categories as per Environmental Footprint method
Circular Footprint Formula (CFF) parameters provided
Biogenic carbon accounting and climate change modelling specified
Company-specific data required; primary data share specified
A1-A3 (product stage), A4-A5 (construction/distribution), B1-B7 (use stage), C1-C4 (end-of-life), D (benefits/loads)
External review panel review required prior to publication
Cut flowers and Potted plants from floriculture sector
Comparisons and comparative assertions allowed only if PEF studies conducted in compliance with PEFCR
Enable comparisons between PEF studies; calculate relevant environmental information
Bill of materials (BoM) and material content declaration required
Time period to consider for data collection of cultivation stage specified
Product Environmental Footprint Category Rules for Cut flowers and Potted plants
Geographical representativeness required
Modelling of end of life and recycled content specified
Technological representativeness required
Business-to-business (B2B) communication
Portland cement, blended hydraulic cements, Portland-limestone cement, performance-based hydraulic cement, fine aggregat
Comparison based on LCA A1-A3 data shall be made only if the same secondary data sets and all subsequent life cycle stag
North America; may be used in other regions where program operators deem it appropriate
Concrete - composite material consisting of binding medium (cement paste, hydraulic cement and water) with fine and coar
NSF International National Center for Sustainability Standards
PCR for Portland, Blended, Masonry, Mortar, and Plastic (Stucco) Cements
Cement-based products; additional PCR required for concrete and other cement-based products
EPDs based on cradle-to-gate information modules shall not be used for comparisons
Portland cement, blended cement, masonry cement, mortar cement, and plastic (stucco) cement
Conventional concretes, lightweight concrete, high performance concretes, ultra-high-performance concretes, flowable fil
Concrete manufactured in batching plants (permanent or mobile), including volumetric mixing, delivered to construction s
NSF Product Category Rule for Environmental Product Declarations
Independent verification (review panel required)
Gate defined as point at which concrete admixture is transferred to vehicle for transport to customer
Sustainable design construction programs and ratings, green building programs
Independent review panel with qualified verifiers
Water, cement SCM, aggregates, fiber or steel reinforcement
Chemical concrete admixtures following ASTM C260/260M, ASTM C494/C494M, ASTM C979/C979M, ASTM C1582/C1582M, ASTM G109, A
North America, may be used in other regions where program operators deem it appropriate
Concrete Admixtures - CSI MasterFormat 03 05 55
Concrete products requiring additional LCA stages such as formwork, reinforcement and curing
Portland cement, blended hydraulic cements, aggregates, supplementary cementitious materials, chemical admixtures, fiber
If environmental indicators for products in average differ by more than ±10%, minimum and maximum shall be reported; or
North America (primarily); may be used in other regions where program operators deem it appropriate
Cradle-to-gate, cradle-to-gate with options, and cradle-to-grave
Modules A1-A3 (cradle-to-gate), A1-A5 (with installation), A1-A3 and C1-C4 (with end-of-life), or A1-A5, B1-B7, C1-C4 (c
Declared unit for cradle-to-gate options; Functional unit for cradle-to-grave
North American organizations, Gypsum Association and member companies, North American gypsum board manufacturers
Paper-faced gypsum board, glass-mat gypsum panels, fiber reinforced gypsum panels, and laminated gypsum panels
Interior and exterior gypsum panel products including paper-faced gypsum board, glass-mat gypsum panels, fiber reinforce
Independent external verification by expert review panel
Screens, interior architectural wood door leaves, commercial steel doors, processed glass, and flat glass products cover
Skylights, windows, curtain walls, storefronts, doors, and all non-optional components
Fenestration assemblies including skylights, windows, curtain walls, storefronts, and doors
Flat glass products including float glass, rolled glass, cast glass, and tinted glass, but excluding coatings, tempering
Unworked cast, rolled, drawn or blown glass in sheets; float glass and surface ground or polished glass in sheets; glass
Public communication of environmental information
Product name, manufacturer/model number, general description, and picture required
Seats primarily with metal frames (38111), wooden frames (38112), and other seats (38119)
This PCR was not written to support comparative assertions between products of different manufacturing organizations
Seating products - subcategory of furniture
USLCI (US), ELCD (Europe), Japanese LCI Database, or other representative data
RSL must be based on verifiable performance history including empirical, probabilistic, statistical, deemed to satisfy o
Only EPDs prepared from cradle-to-grave life cycle results based on the same function, reference service life (RSL) quan
Rigid and flexible piping systems including pipes, fittings and other materials used to install the system, for use in b
SI units; Imperial System units may also be used in addition; kW and kWh or MJ for power and energy
PCR reviewed by LCA expert prior to publication
International EPD® System PCR for Construction Products and Construction Services Version 2.2
Materials and substances adversely affecting human health and environment shall be included independent of cut-off rules
English; US spelling for North American EPDs
Flow diagram (Table 4 or equivalent) describing LCA inventory scope; content declaration; environmental performance data
North America; globally applicable with North American specific requirements
U.S. EPA eGRID electricity supply mixes for US facilities; comparable sub-national or country-specific mixes for other r
Circular Ecology PCR Construction & Building v1.0
Circular Ecology Construction & Building v1.0
Allocation of co-products used in cement and concrete products defined in section 5.6.3
Core environmental indicators specified in section 5.19
Biogenic carbon content (carbon sequestration) accounting required in section 5.11
Primary data requirements specified in section 5.7
Gross and net GWP accounting specified in section 5.12
Declared units as default; functional units only for cradle to grave EPDs with defined RSL
Excluded life cycle modules shall be justified and reported in project LCA report and EPD
Manufacturers, suppliers, industry associations, and other organisations developing EPDs
Period of validity defined in section 7.5
Raw materials, intermediate products, finished building and construction goods, and building and construction related se
EPDs shall not be used for comparative assertions unless all respective EPDs meet comparability criteria of ISO 14025:20
Construction and building sector products and services globally
Construction products and services including buildings and infrastructure
Secondary LCA data requirements specified in section 5.9
Allocation of waste defined in section 5.6.2
BRE EN 15804 PCR PN514 issue 0.0 (construction products)
BRE EN 15804 PCR PN514 issue 0.0 (construction p
Impact categories based on EN 15804:2012
Content of the Environmental Product Declaration including general information, LCA parameters, scenarios and additional
BRE Global EN 15804 EPD Scheme Document SD207 rev3
BRE Global EN 15804 EPD Scheme Document SD207 re
PN 514 – PCR for Construction Products EPD (to EN 15804:2012)
BRE EN 15804 PCR PN514 rev 0.1 (construction products)
BRE EN 15804 PCR PN514 rev 0.1 (construction pro
kg, m, m2, m3 or other appropriate units
Cradle-to-gate, cradle-to-grave, or gate-to-gate depending on product type
Independent verification by third party panel
Biogenic carbon accounting per EN 16449:2014 for wood and wood-based products
EN 15804:2012+A1:2013 (core rules for construction products)
Manufacturers, designers, users, owners of buildings and construction sector professionals
Format of BRE EN 15804 EPD as specified in section 7.6
Comparability of EPD of construction products
EPD Hub General Programme Instructions (GPI) v1.3.1
EPD Hub General Programme Instructions (GPI) v1.
English, French, German primarily; other languages supported with mandatory English translation
Mandatory for Electrical and Electronic Equipment (EEE) products
EPD Hub Product Category Rules (PCR) v1.2.1
Capital goods, equipment and machinery can be excluded according to criteria for exclusion of inputs and outputs
Core environmental impact indicators and additional environmental impact indicators as per EN 15804+A2 and ISO 21930
A1-A3 (product stage), A4-A5 (construction stage), B1-B7 (use stage), C1-C4 (end-of-life), D (benefits and loads)
Reference service life of construction product, component, assembly, or system under reference in-use conditions
EPD validity period as per EN 15804 and ISO 21930 standards
EPDs within same product category but different programs may not be comparable; must be based on same PCR
Business-to-business use, LCA information for environmental product declarations and carbon footprint declarations
Mass of packaging shall always be declared; biogenic carbon content in product and packaging must be accounted for and d
LCI database selection per EN 15804 and ISO 21930 requirements
Construction timber and wood-based materials
Building materials and construction products
Yarn and fabric (excluding those for construction) v.1.0.0
Yarns and fabrics (excluding construction use)
Electrical and Electronic Products and Parts
Electrical and electronic products and their components
Imaging input and/or output equipment products
Steel products (except for construction use)
Steel products with secondary processing for construction
Steel products with secondary processing for construction (intermediate goods)
Steel products with secondary processing (except for construction use)
Steel products with secondary processing (except for construction use) (intermediate goods)
Polyethylene Pipes and Fittings for Water Supply（intermediate goods）
Apparel and Textile Apparel Accessories except Fur and Leather Apparel
ISO14067:2018 compliance requires biogenic GHG emissions and removals
Primary data collection required for important raw materials (synthetic resins), water, fuel, electricity, additives, pa
Businesses declaring synthetic yarn products in SuMPO Environmental Label Program
Follows core PCR PA-240000-BP requirements
Specified transport scenarios by lifecycle stage with vehicle types and load factors
Sustainable Management Promotion Organization (SuMPO)
Synthetic yarn (construction product) - intermediate material for flooring applications
Paper Containers, Packaging and Wrapping
Recycled Plastics material (Intermediate Goods)
Plastic pallet for cargo and transportation
Precast Concrete（PC）(intermediate goods)
Fittings for Single-Stack Drainage System（intermediate goods）
Ground Improvement and Ground Reinforcement Works
Product Category Rule for “Panels of wall or ceiling for bathroom (except units for building)”
Commercial printings & Security printing products
Pre-Sensitized plates for lithographic printing
Heat Insulator of Cellulose Fiber for Blowing
Reference service life (RSL) is the service life expected under defined in-use conditions
End-of-life scenarios including reuse, recovery, and recycling
EN 15804+A2 and NPCR Part A for construction products
Use stage scenarios to be developed for furniture products
Sinks, taps, white goods, staircases, luminaires not intended for use as furniture
Development of environmental product declarations (EPD) for furniture and parts thereof
Declarable substances and substance groups in accordance with IEC 62474 at or above reporting threshold amounts
Accounting of biogenic carbon during the life cycle required
NPCR Part A - core rules for construction products
Companies preparing environmental product declarations for photovoltaic modules
100 years for civil engineering works and 60 years for buildings
1 m of installed cable pipe with a specific function, from cradle-to-grave
Guidelines for development of environmental product declarations for cable pipes; cradle to gate with options or cradle
Cable pipes comprise all kinds of cable pipes prepared for trade and made of different materials
Product stage A1-A3 information modules to be declared
Gypsum plasterboards, cement boards, composite boards, wood-based panels
Construction process stage A4-A5 information modules to be declared
Use stage B1-B5 information modules to be declared
Environmental product declarations for building boards; either cradle to gate with options or cradle to grave
Benefits and loads beyond the system boundary information module
Building boards of various materials including gypsum plasterboards, particleboards, OSB boards, wood fibreboards, plywo
End-of-life stage C1-C4 information modules to be declared
Functional unit for outdoor products; Declared unit for indoor products
Environmental product declarations for electrical cables and wires
As in Part A with clarifications for forest clearance and land use restoration
Cradle-to-gate (minimum) and Cradle-to-grave (maximum) with options
As in PCR part A (EN 15804+A2 indicators)
Release of dangerous substances to indoor air, soil and water shall be declared
A1-A3, A4-A5, B1-B7, C1-C4, D (depending on product type)
Functional unit should be used when specific use is known; declared unit when functional unit not applicable
Companies preparing EPDs for aggregate or natural stone products
Raw material extraction, transport, manufacturing, construction, use, end-of-life processes
Forest clearance with economic value excluded by partitioning
Cradle-to-gate with options (minimum requirement includes A1-A3, A4-A5, C1-C4, D)
Verification and validity of EPD required
Declaration of release of dangerous substances to indoor air, soil and water required
Primary data share requirement specified
Construction process stage A4-A5 required
Wood and wood-based products for construction
Cradle-to-gate with options including A1-A3, A4, C1-C4 and D
Functional unit or declared unit; functional unit for products with surface treatments typically maintained during use;
Companies preparing an environmental product declaration (EPD) for steel and aluminium construction products
Steel and aluminium products, structures, metal fasteners, pipes and tubes, and other metal construction products per li
Module D benefits and loads beyond system boundary shall be included
End-of-life stage C1-C4 shall be included
Skip hoists, escalators, moving walkways, and products not used as construction products
Mandatory product specification including type of installation, commercial name, main purpose, lift type, drive system,
373 Refractory products and structural nonrefractory clay products
Cement and building lime as defined in EN 16908:2017